rolling reduction
英 [ˈrəʊlɪŋ rɪˈdʌkʃn]
美 [ˈroʊlɪŋ rɪˈdʌkʃn]
网络 压下率; 压下量; 轧压减量; 压缩比
双语例句
- The results show that, the cold rolling reduction has a great effect on the development of phase transformation textures.
结果表明冷轧形变量对相变织构的形成影响最大。 - In the heating process of rolling reduction of fuel consumption and ignition loss is of great significance.
轧钢加热过程中，降低燃耗与烧损具有重要意义。 - Relation between rolling reduction, friction coefficient, wall thickness and rolling force was studied.
结果表明：咬入时，轧制力随摩擦系数、壁厚和缩径量的增加而提高； - Annealing texture of CSP low carbon steel sheet under different cold rolling reduction ratio
CSP工艺不同冷轧压下率低碳钢板退火织构的演变 - Influence of CSP Coiling Temperature and Cold Rolling Reduction Ratio on Microstructures and Mechanical Properties of Deep-Drawing Steel Sheets
卷取温度和冷轧压下率对CSP流程深冲板组织性能的影响 - Effects of Cold Rolling Reduction on Microstructure of Ti+ P-IF Steel
冷轧变形量对Ti+P-IF钢微观结构的影响 - By optimizing the process parameters of rolling reduction, rolling speed, rolling temperature, cooling rate, and coiling temperature, the good strip products with balanced properties can be produced by thin slab continuous casting and hot strip rolling.
通过优化道次变形量、轧制速度、轧制温度、冷却速率和卷取温度等工艺参数可得到综合性能优良的微合金高强度的带钢产品。 - The recrystallization behavior and the variation in hardness of cold rolled Inconel 718 alloy have been investigated in the temperature range of 810~ 910 ℃ as a function of cold rolling reduction and annealing time.
研究了冷轧Inconel718合金的再结晶行为及退火过程中硬度的变化规律。 - Effects of cold rolling reduction on recrystallization texture of 6111 aluminum alloy
阿卢诺夫铝板带公司的冷轧机形变量对6111铝合金再结晶织构的影响 - Quantitative investigation on the effect of cold rolling reduction on the fiber-texture development of IF steel sheet
冷轧压下量对IF钢板的纤维织构演变影响的定量研究 - A group of pure tantalum plate processes were designed by means of an orthogonal experimental design. The effects of cogging mode of initial ingot, rolling direction, annealing temperature and rolling reduction on the grain size of the final plates have been investigated.
利用正交实验设计方法考察了两个水平的开坯方式、轧制方向、退火温度以及轧制变形量对钽片晶粒尺寸的影响。 - Researches about effect of aluminium content and cold rolling reduction on magnetic iron cold-rolled sheets are developed, and applied in production with active results.
就铝含量和冷轧变形量对电磁纯铁冷轧板矫顽力（Hc）的影响结合生产实际进行了研究并在生产实践中取得较好效果。 - By means of ITTC two-parameters wave spectrum, efficiencies of rolling reduction on various significant wave heights are predict.
用ITTC双参数海浪谱预报了不同有义波高时水舱的减摇效果。 - The effects of hot rolling reduction in ferrite range and lubrication condition on the properties and recrystallization texture of Ti-IF steel strip were studied.
研究了铁素体区热轧压下率和润滑条件对一种Ti-IF钢的热轧后退火钢板的力学性能的影响以及润滑条件对再结晶织构的影响。 - Effect of Cold Rolling Reduction on Drawability of Hot Rolled IF Steel Sheet in Ferrite Region
冷轧压下量对铁素体区热轧Ti-IF钢冷轧板深冲性能的影响 - He influence of different cold rolling reduction rates on the properties of P-bearing steel is described in the paper.
阐述了含磷钢不同的冷轧压下率对其性能的影响。 - The effect of cold rolling reduction on properties of deep stamping cold rolled sheet
压下率对冷轧深冲板性能的影响 - Effects of cold rolling reduction rate on properties of P-bearing steel
冷轧压下率对含磷钢性能影响的研究 - As the rolling reduction increases, the proportion of fine lamella increases.
精细片层区域的比例随着轧制压下率的提高而增大。 - The effect of rolling reduction on the formation of texture in cold rolled and annealed titanium sheet has been in investigated by means of the crystallite orientation distribution function analysis ( CODF).
采用三维晶体学取向分布函数（CODF）分析法研究了工业纯钛板材不同冷轧形变量对织构形成的影响。 - Through the rolling experiments, the influencing regularity of the rolling starting temperature and the rolling reduction on the microstructure and the mechanical properties has been obtained.
再轧制实验，获得了不同开轧温度和轧制压下量对组织性能影响数据。 - However, with medium rolling reduction and annealing the secondary grain growth in the steel containing MnS inhibitor is isotropic.
经中等压下率冷轧和退火的含MnS抑制剂的钢中，二次晶粒长大是各向同性的。 - As for the traditional production line of hot-rolled strip steel, most of the rolling reduction will be completed in the rough rolling from slab to finished strip, so the production efficiency of rough mill had a determinative effect on the entire rolling rhythm and output.
对于传统热轧带钢生产线，从板坯到成品带钢，轧件的压下量绝大部分将在粗轧完成，粗轧机的生产效率也往往对整个轧制节奏和产量有决定性的影响。 - The orientation densities of the main texture components increased as the increasing of the cold rolling reduction.
随着冷轧变形量的增加，这些织构组分的取向密度不断增强。 - After large cold rolling reduction, we will find deformation bands 、 shear bands and other organizations in Ta-W alloy foil, with the increasing of tungsten content and the cold rolling reduction, the more obvious of these microstructures. 4.
Ta-W合金板材经大的冷轧变形之后，会形成形变带和剪切带等微观组织，随着W含量和轧制变形量的增加，这种显微组织越明显。 - In this paper, the heating temperature and rolling reduction ratio experiments are used to study the factors that rolling technology on the microstructure and mechanical properties of stainless steel/ carbon clad plate.
采用了加热温度和轧制压下率实验来研究轧制工艺对真空复合轧制不锈钢/碳钢复合板微观组织和力学性能的影响。 - The Ta-W alloy billets with different tungsten content were fabricated by powder metallurgy technology. Through cold rolling technology, we obtain different cold rolling reduction of Ta-W alloy foils.
本文采用粉末冶金法制备了不同W含量的Ta-W合金坯锭，通过冷轧控制技术，最终得到不同冷轧变形量下的Ta-W合金板材。 - Increasing the cold rolling reduction could improve the formability of cold rolled and annealed sheets, but the thickness of the cold rolled sheets deteriorated the wrinkle resistance while the reduction was oversized.
增大压下量有助于提高冷轧退火板的成形性能，但是当压下量过大时，冷轧板厚度成为恶化其抗皱性的一个主导因素。 - Including the calculation model of rolling reduction, the mathematical model of DAGC, rolling plastic-coefficient calculation model, the mathematical model of monitoring AGC, and establish the mathematical model of Mass flow AGC by studying the theory of continuous rolling tension.
其中包括压下量计算模型、DAGC的数学模型、轧件塑性系数计算的模型、监控AGC数学模型，通过对连轧张力理论的研究，建立流量AGC数学模型。